Fuel Cell, Systems and Technologies

Tests Cells

PaxiTech commercialise test cells for testing PEM fuel cells. The test cells consist of 2 graphite bipolar plates each containing a single channel few field for gas distribution, 2 stainless steel and plates equipped with the necessary fittings for the gas inlets and exits, the current is collected via 2 copper plates which are isolated form the end plates by 2 teflon separators.

Standard Test Cell Sizes :

1. 5cm² for testing PEM fuel cells with an active area of 5cm².
2. 16cm² for testing PEM fuel cells with an active area of 16cm².
3. 25cm² for testing PEM fuel cells with an active area of 25cm².
4. 50cm² for testing PEM fuel cells an active area of 50cm².

Other test cell sizes can be delivered according to client specifications - send details to info@paxitech.com.

Test Benches

PaxiTech and Bio-Logics Science Instruments worked in direct collaboration in the design and conception of the FCT 150-S fuel cell test bench. The FCT 150-S test station is for testing PEM single fuel cells. A wide variety of techniques are available with the FCT 150-S including voltage and current pulse, voltage and current scan and potentiostatic and galvanostatic electrochemical impedance spectroscopy with or without ohmic drop compensation. The FCT 150-S test bench is commercialised by Bio-Logic Science Instrument.

Fuel Cell Electronic Load

This instrument is an electronic load in constant current or voltage regulation, with simultaneous current and voltage reading. It is intended for characterization of the fuel cell elements, with an automatic recording capability of the current and voltage values when associated with an external recording system connected to a monitoring outpout.

Home | Contact Us | ©2004 PaxiTech®|